CLOSETS & GARAGE CABINETS
Your 3 Day Closets organizers are engineered to be fully adjustable by you in order to meet your changing needs. The following instructions are for various components of your system. It is important that you follow these instructions to ensure the long-term integrity of your organizers and cabinetry.

Shelves
Your organizers are fitted with both adjustable and fixed shelves. Typically, a fixed shelf is secured at approximately mid-height. Fixed shelves provide structural integrity to the system, and are secured with locking cams. We advise against moving them if possible. If you do need to move a fixed shelf, you will need to unlock the cams on the bottom of the shelf. Gently remove the shelf and move the screws to the new desired location as close to center height as possible. Then securely set the shelf back into place and re-tighten the cams. It is very important that you re-install the fixed shelf and do not leave the system unsupported. If a blemish is left in the Melamine where your screws were originally set, please call us and we will be happy to mail you adhesive caps to cover any unsightly markings.
Your other shelves are fully adjustable, and can easily be moved by just removing the 4 support pins and reinserting them at the desired height. A pair of pliers may be helpful in removing and replacing the support pins. First, remove the shelves by simply lifting them up about 2 inches and then pulling them out. You may need to tap the shelf gently to secure it back into place when re-installing it. Be sure the shelf has settled securely onto all four pins.

Hanging Rods
Remove all hanging items from the bar. On each end of the bar, you will see oval or circular rod cups. Remove the rod by lifting it out of the rod cups. With the rod removed, pull out the two cups and reinstall them at the desired height. (A screwdriver may be helpful in removing the cups.) Make sure the rod cups are at the same level before you reinsert the rod. Pull down firmly on the rod to make sure it is seated properly into the rod cups.

Hinges
Please see attached diagram for hinge adjustment instructions.

FURNITURE
Your 3 Day Closets furniture is fully adjustable to fit your changing needs. Below are instructions for adjusting various components of your system. It is important that you follow these instructions to ensure the long-term integrity of your furniture.

Shelves
Your shelves are fully adjustable and can easily be moved. To adjust shelves in cabinets behind doors, simply remove the 4 support pins and replace them at the desired height. A pair of pliers may be helpful in removing and replacing the support pins. To move adjustable shelves in open bookcases, slide out the shelf, remove the support rails, and replace them at the desired height.

Hinges
Please see attached diagram for hinge adjustment instructions.

CLEANING

Melamine
A clean cloth with any non-abrasive cleaner or glass cleaner will remove most spots. If you should get a tough spot (grease, glue, etc.) a small amount of nail polish remover, lacquer thinner or mineral spirits on a clean cloth should remove the stain. You should follow all instructions and safety precautions as listed on the container when using strong chemicals such as lacquer thinner or mineral spirits. Avoid using any abrasive cleaner such as Soft Scrub.
.
Wood
Wiping with a clean dry cloth is best for normal maintenance. For heavy cleaning, standard wood furniture cleaning products. Do not use solvents such as lacquer thinner or mineral spirits on wood. Immediately wipe off and dry any other liquids such as water or coffee that may come into contact with your wood finish.

High Pressure Laminate
Many of our countertops are made with high pressure laminate. The same cleaning
instructions indicated for Melamine above will work on high pressure laminate surfaces.

Lucite
Lucite is best cleaned by gently wiping with a small amount of water dabbed on a soft cloth. Then, pat dry with a lint-free cloth. Lucite is susceptible to scratches and may become clouded over time by chemicals found in commercial glass cleaners. Avoid using any chemical cleaners, such as window cleaning solutions, alcohol, or ammonia.