| Choose from 10 standard sizes. Standard sized 3D Sliding Shelves ship within 3 working days. Custom sizes are available and ship within 5 working days. Upgraded soft close track is available on all Roll-Out Shelf sizes. Sizing Example: 18" x 12" shelf needs a 19-1/2" x 13"cabinet opening. Make sure to look for obstructions! |
 |
 |
Step 1 - Measure
Measure width of opening from face frame to face frame. Make sure to allow for hinges that protrude into the opening .
Measure the depth of the cabinet from the face of the cabinet to the back of the cabinet. Make sure to look for obstructions such as electrical or plumbing.
Measure again! ***PLEASE NOTE: Frameless (European) cabinets or cabinets with hinges that protrude into the opening 1/2" or more, need an extra 3/4" of space in the opening. Example: 12" shelf would need 13-3/4" cabinet opening. |
 |
Step 2 - Order
Go to our online store and order the shelves you need. Shipping times vary from state to state, but take 4-6 days
|
 |
Step 3 - Seperate
Separate drawer from base unit. |
 |
Step 4 - Set Base
Firmly set base 1/4" from front cabinet edge. |
 |
Step 5 - Tighten
Tighten 4 pre-drilled screws into cabinet base or shelf.
Note: If you do not have a floor or permanent full depth shelf, The easiest way to solve this problem is by adding a shelf. All that is required, in most cases, is drilling four holes in the side walls of the cabinet at the desired height and cutting a shelf to fit the inner dimensions of the cabinet.
Once the holes are drilled and the shelf is cut, you will want to use locking shelf clips to hold the shelf in place. Our shelf clips come in two sizes that fit the most common cabinet shelf thicknesses of 3/4" and 5/8". Feels free to call us and we will be happy to help you. |
 |
Step 6 - Finish
Insert the Sliding Shelf in the cabinet guides and you are done! |